Epson Stylus Pro 7450 User Manual Download Page 258

Page: 258 / 373

Maintenance and Transportation

258

18. Make sure

RAISE THE RIGHT INK LEVER

appears on the LCD

panel, and then raise the ink lever on the right ink
compartment.

Make sure

RAISE THE LEFT INK LEVER

appears on the LCD

panel, and then raise the ink lever on the left ink compartment.

19. The printer starts charging ink. After a while, ink lever

messages appear on the LCD panel. When a message appears
on the LCD panel, raise or lower the ink levers accordingly.

Note:

Because ink charging after black ink conversion consumes a large
quantity of ink, you may need to replace the ink cartridges soon.

20. When

LOWER THE RIGHT INK LEVER AND CLOSE THE COVER

appears on the LCD panel, lower the right ink lever and close
the cover. Then, when

LOWER THE LEFT INK LEVER AND CLOSE

THE COVER

appears on the LCD panel, lower the left ink lever

and close the cover.

The ink charging is completed.

Summary of Contents for Stylus Pro 7450






















































































































































































































































































































































































Search results

Summary of Contents for Stylus Pro 7450

Reviews:

Related manuals for Stylus Pro 7450

Brands by name

Popular brands

Epson Stylus Pro 7450, User Manual

Search results

Summary of Contents for Stylus Pro 7450

Reviews:

Related manuals for Stylus Pro 7450

Brands by name

Popular brands