Epson Stylus Pro 7450 User Manual Download Page 208

Page: 208 / 373

Paper Handling

208

❏

Adjust the feed strength by pressing the

Paper Feed

buttons on the control panel. When using thick, heavy, or
curled paper, press the

Paper Feed

button to increase

the power. When using thin or light paper, press the

Paper Feed

button to decrease the power.

❏

If the paper does not come out even after you execute the
procedure above, open the front cover and then pull the
paper out manually.

6. Holding the bottom edge of the paper, turn the roll paper to

remove the slack. Make sure that the bottom edge of the paper
is straight, and that it is aligned with the horizontal line.

Note:

You do not have to align the right end of the paper with the vertical
line.

Summary of Contents for Stylus Pro 7450






















































































































































































































































































































































































Search results

Summary of Contents for Stylus Pro 7450

Reviews:

Related manuals for Stylus Pro 7450

Brands by name

Popular brands

Epson Stylus Pro 7450, User Manual

Search results

Summary of Contents for Stylus Pro 7450

Reviews:

Related manuals for Stylus Pro 7450

Brands by name

Popular brands