Epson Stylus Pro 7450 User Manual Download Page 151

Page: 151 / 373

The Control Panel

151

Combination of buttons

This section describes the functions available when several
buttons are pressed at the same time.

Messages

This section describes the meaning of messages displayed on the
LCD panel.

Messages are either status messages or error messages. For error
messages, see “An error has occurred” on page 284.

Buttons

Function

1. Power button

2. Pause button

If the printer is turned on while you are
pressing and holding the Pause

button,

the printer enters Maintenance mode.

1. Pause button

2. Paper Source button

By pressing the Pause

button and Paper

Source

button, you can switch the Roll

Paper Counter setting on and off.

Note:
To use this combination of buttons,
REMAINING PPR SETUP in Maintenance
mode and ROLL PAPER COUNTER in Menu
mode should be on.

Message

Description

READY

The printer is ready to print data.

PRINTING

The printer is processing data.

INK DRYING

The printer is drying ink.

PAUSE

The printer is paused.

Displays EPSON logo
and progress bar

The printer is preparing to print.

CUTTING PAPER
PLEASE WAIT

The printer is cutting the paper.

Summary of Contents for Stylus Pro 7450






















































































































































































































































































































































































Search results

Summary of Contents for Stylus Pro 7450

Reviews:

Related manuals for Stylus Pro 7450

Brands by name

Popular brands

Epson Stylus Pro 7450, User Manual

Search results

Summary of Contents for Stylus Pro 7450

Reviews:

Related manuals for Stylus Pro 7450

Brands by name

Popular brands