Epson Stylus Color C60, Service Manual

Page: 132 / 188

EPSON Stylus C50/C60/C61/C62 Revision C
Disassembly and Assembly Disassembly 124
C H E C K
P O I N T
†
When removing the PF roller, be careful not to damage the Spur
gear 60 with the Main frame.
†
When assembling the PF roller unit to the Main frame,
„
Be careful not to damage the Spur gear 60 with the Main
frame.
„
Make sure to set the PF roller bushing to the cutout portion
of the Main frame.
†
When assembling the Paper guide upper/left to the Main frame,
„
Avoid to damage the coated surface of the PF roller by using
the OHP sheet. (Refer to Figure 4-69)
„
Make sure that the Paper guide is correctly fixed to the Main
frame.
[Reference: Procedure for assembling the Paper guide]
1. Set the Torsion spring 48.51 into the groove of the Paper guide
upper/left as shown figure below.
Figure 4-72. Paper guide assembling (1)
Torsion spring 48.51
2. Install the Paper guide upper/left to the Main frame as shown
figure below, and slide it to the right side
.
Figure 4-73. Paper guide assembling (2)
3. Release the Torsion spring 48.51 by using the tweezers as shown
figure below.
Figure 4-74. Paper guide assembling (3)
Step1) Install the Paper guide upper/left
Step2) Slide it to the right side
Set these protrusions on the Main frame