EPSON Stylus COLOR 580
Revision A
Troubleshooting
Unit Level Troubleshooting
58
Table 3-13. Paper jam error indication on STM3
Paper Jam error indication on STM3
Step
No.
Detail phenomenon
Check point
Remedy
3
The paper is jammed
around the Front paper
guide.
1. Check if the Front
paper guide is floating
from the assemble
position.
2. Check if there is any
damage around the
rear edge of the each
rib on the Front paper
guide.
If it is no problem,
proceed the next step
1. Assemble the Front
paper guide front to the
suitable portion and
confirm the PF grounding
spring is securing the
Front paper guide.
2. Replace the Front paper
guide with new one.
4
Paper is loaded
correctly from ASF.
But, after complete the
print job, paper jam
indicated on the screen
without any paper jam.
If you send the new
print job in this
condition, the General
error is indicated on
the screen.,
• Check if the Torsion
spring 0.22 comes off
on the both PE sensor
lever.
• If the Torsion spring
0.22 is not set on the
correct position, set it
correctly. If any paper
dust is placed around the
PE sensor lever, remove
it
• If it is no problem,
proceed the next step
Front paper guide
PF grounding spring
Front Paper guide
Tension spring
0.22
PE sensor lever
Table 3-14. Paper jam error indication on STM3
Paper Jam error indication on STM3
Step
No.
Detail phenomenon
Check point
Remedy
5
When the paper is
loaded from the ASF
and ejected without
any printing. After
eject the paper,
paper eject sequence
is continued.
If any print job is
sent to the printer,
General error is
displayed on the
STM.
1. Check if the CN1
connector cable for HP/
PE/IC sensor cable is
disconnected on the
Main board or sensor.
2. Check if the HP/PE/IC
sensor operates
correctly by using the
tester. Refer to Table
3-2.
1. Connect the CN1
connector cable to the
CN1 on the Main board.
2. Replace the HP/PE/IC
sensor with new one.
3. If the problem is not
solved, replace the Main
board with new one.
Summary of Contents for STYLUS COLOR 580
