Epson STYLUS COLOR 580, Service Manual

Page: 117 / 149

EPSON Stylus COLOR 580 Revision A
Adjustment Sequential Repair Service Program feature 117
5.2.7 Printer mechanism replacement
Stylus COLOR 580 dose not have ASP printer mechanism. So, you may not have a
chance to use this function in your service activity. However, in case you change the
printer mechanism in your printer swap service, use this function.
The adjustment item and the order are same as “Printhead replacement”. So, as for the
detail, refer to Section 5.2.3 on page 109.
NOTE: Use the function for the following case.
* Printer mechanism (except the waste drain ink pad and circuit board,
printhead) is changed with other one
1. Click the “Printer mechanism replacement” in the Sequential repair service
program.
Following menu is displayed.
Figure 5-47. Printer mechanism replacement
2. Follow the adjustment item displayed on the above menu.
For the detail, refer to Section 5.2.3 on page 109 due to the adjustment item and
order are same as “Printhead replacement”.
5.2.8 Waste ink pad replacement
When the Waste drain ink pad is replaced with new one due to the maintenance error,
you have to replace the Waste drain ink pad with new one and reset the counter.
1. Connect the printer to your PC and run the Adjustment program. If the waste drain
ink pad counter reaches to the limit counter, the status monitor of this program
displays the “Maintenance error” automatically.
Figure 5-48. Maintenance error
2. Turn off the printer and replace the Waste drain ink pad with new one. Click the
“Clear” button to clear the waste drain ink pad counter stored in the EEPROM on
the Main board after turn on the printer.
If the status monitor dose not detect the Waste drain ink pad counter correctly,
click the “Waste ink pad replacement” in the sequential repair service program and
use the following function. Clicking the “Protection counter clear” button clears
the counter in the EEPROM. The suitable waste drain ink pad life is set in the
EEPROM automatically according to the market setting of the initial setting menu.
Figure 5-49. Waste drain ink pad replacement