Epson Stylus 1500 Service Manual Download Page 39

Page: 39 / 185

INK CARTRIDGE SPECIFICATIONS

Black

Type:

Exclusive cartridge

Model:

S020062

Color:

Black

Print capacity

1900 pages /letter ( LQ Roman ECMA text)

Life:

2 years from indicated production date

Storage temperature: 86

F to 104

F (–30

C to 40

Storage under a month at 104

F (40

F - 140

F (–30

C - 60

Transit under 120 hours at 140

F (60

and under a month at 104

F (40

Dimensions:

1" (W)

5.5" (D)

4.1" (H)

25.1 mm (W)

139.6 mm (D)

105.3 mm (H)

Color

Type:

Exclusive cartridge

Model:

S020049

Color:

Magenta, cyan, yellow

Print capacity:

320 pages / letter (at 360 dpi, 5% duty and each color)

Life:

2 years from indicated production date

Storage temperature: –4

F to 104

F (–20

C to 40

Storage under a month at 104

F (40

F to 104

F (–30

C to 40

Packing storage under a month at 104

F (40

–30

C - 60

C (86

F - 140

Transit under 120 hours at 60

C (140

and under a month at 104

F (40

Dimensions:

1.7" (W)

2.2" (D)

1.5" (H)

42.9 mm (W)

56.8 mm (D)

38.5 mm (H)

Notes:

1. The ink cartridge cannot be refilled; it is the only consumable.
2. Do not use an ink cartridge that has exceeded the ink life.
3. The ink freezes below 37

F (–3

C); however, it can be used after it returns to room

temperature.

PHYSICAL SPECIFICATIONS

Weight:

25.4 lb (11 .5 kg)

Dimensions:

26.1" (W)

19.8" (D)

8" (H)

664 mm (W)

504 mm (D)

202 mm (H)

Printer Features

1-32

EPSON Stylus 1500 Service Manual

Summary of Contents for Stylus 1500


























































































































































































Search results

Summary of Contents for Stylus 1500

Reviews:

Brands by name

Popular brands

Epson Stylus 1500, Service Manual

Search results

Summary of Contents for Stylus 1500

Reviews:

Brands by name

Popular brands