5.
Check other settings, and then start printing.
Printing Banners
You can print banners and panoramic pictures if you create and set print data for banner printing in your
application.
To print banners, select
Roll Paper
as the
Paper Source
in the printer driver.
You can print data created by document preparation software, image editing software, and so on. If you use image
editing software, create print data at a size supported by the given application while maintaining the printing
length and width ratio.
The following printing sizes are available.
Width
SC-P900 Series: 431.8mm
SC-P700 Series: 330mm
Length
*
Max. 18m
*:
The paper length can be longer if using applications that support banner printing. However, the actual print size depends
on the application, the paper size loaded in the printer, and the computer environment.
1.
On the printer driver's print dialog, select the size of the data created with the application in
Paper Size
.
If items on the
Page Setup
screen are not displayed on the
screen due to the application being used,
display the
Page Setup
screen and make settings.
2.
Check other settings, and then start printing.
Printing by Increasing Black Density
To print by increasing black density, use black enhance overcoat in the printer driver. This feature overcoats light
gray ink on the dark parts of printouts to increase the maximum density of black and to increase the dynamic
range.
Black enhance overcoat is only available for glossy paper. Note that it is not available for all types of glossy paper.
>
>
61
Summary of Contents for SC-P700 Series
