Epson SC-F500 Series User Manual Download Page 65

Page: 65 / 147

Set

Number of panels

in the Poster dialog box.

If you want to print marks to serve as a guide
when joining together paper printed with poster
printing, select the

Print Cutting Guides

check

box.

Overlapping Alignment Marks

Prints guides for joining the paper with
overlapping. The finished size is smaller only for
the overlapping portions.

Print page frames

Prints frames for joining the paper without
overlapping.

Check other settings, and then start printing.

Joining poster sheets in multi-page printing

Overlapping Alignment Marks

is selected, join

guides (indicated by the lines drawn through and
around the X marks in the illustration below) will be
printed on each sheet.

Note:

If the output is in color, the join guides will be in blue and
the cut guides in red; otherwise, all the guides will be
printed in black.

SC-F500 Series User's Guide

Printing with the Printer Driver from Your Computer

Summary of Contents for SC-F500 Series




















































































































































Search results

Summary of Contents for SC-F500 Series

Reviews:

Related manuals for SC-F500 Series

Brands by name

Popular brands

Epson SC-F500 Series, User Manual

Search results

Summary of Contents for SC-F500 Series

Reviews:

Related manuals for SC-F500 Series

Brands by name

Popular brands