manualshive.com logo in svg

Epson SC-F500 Series, User Manual

Share
Download
Epson SC-F500 Series User Manual Download Page 104

Settings item

Settings value

Explanation

Wi-Fi Direct

Disconnected or disabled

This is displayed in gray. Touch this, and then touch 

Start Setup

 on the

next screen to display 

Start Setup

. Touch 

Start Setup

 to enable Wi-Fi

Direct and display the printer's SSID and password.

Connected

Touch to display the printer SSID and password, as well as the number
of connected devices. Touch 

Change Settings

 to display 

Change

Password

 and other menus.

U

 

“Directly Connecting Wirelessly (Wi-Fi Direct)” on page 75

Change Network Name

Change the name of the Wi-Fi Direct connection (SSID) that is used to
connect to the printer to any value. Changing the connection name
(SSID) will disconnect all connected devices. If you change the
connection name, you need to re-connect with the new connection
name (SSID) from the device you want to connect to.

Change Password

You can change the Wi-Fi Direct password. Changing the password
will disconnect all connected computers and smart devices.

Disable Wi-Fi Direct

Performing this operation will disconnect all connected computers
and smart devices. To disconnect only a specific device, disconnect
the connection from the device.

Restore Default Settings

Restores all Wi-Fi Direct settings to the manufacturer's settings.

This also removes connection information stored by the printer that
was registered using the Wi-Fi Direct feature of the smart device.

Wired LAN Setup

Touch to change a wireless LAN connection to a wired LAN
connection. Touch 

Start Setup

 to disable the wireless LAN

connection.

U

 

“Switching to Wired LAN” on page 74

Network Status

Wired LAN/Wi-Fi Status

Display current communications status and connection settings such
as IP address, etc.

Wi-Fi  Direct  Status

Display number of connected devices and connection settings such as
SSID.

Print Status Sheet

Print current network connection detailed information.

Connection Check

Confirm the network status of the printer, and print a network
connection check report. In the event of problems, respond in
accordance with the diagnostics results.

Advanced

SC-F500 Series     User's Guide

Using the Menu

 

104

Summary of Contents for SC-F500 Series




















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands