Epson R340 - Stylus Photo Color Inkjet Printer, Printer Basics Manual

Page: 46 / 81

45
Maintaining Your Printer
This chapter describes maintenance procedures to keep your printer working its best and
preparation steps for moving your printer. Follow the instructions here for:
■
“Cleaning the Print Head” below
■
“Replacing an Ink Cartridge” on page 47
■
“Aligning the Print Head” on page 50
■
“Cleaning the Printer” on page 50
■
“Transporting the Printer” on page 51
■
“Adjusting the LCD Brightness” on page 52
Note: You can also maintain your printer from the
Maintenance
tab on your driver (Windows)
or from the Epson Printer Utility (Macintosh). For details, read your on-screen User’s Guide
(described on page 8).
Cleaning the Print Head
If your printouts are unexpectedly light or faint, or dots or lines are missing from the image,
you may need to clean the print head. This unclogs the nozzles so they can deliver ink
properly. Print head cleaning uses ink, so clean it only if quality declines.
You can clean the print head either from the printer’s control panel or using your printer
software. To clean it using the printer software, the printer must be connected directly to your
computer (not over a network); see your on-screen
User’s Guide for details.
Caution: When you don’t turn on your printer for a long time, the print quality can decline, so
turn it on at least once a month to maintain good print quality.
Follow these steps to clean the print head from the printer’s control panel:
1. Make sure the printer is turned on but not printing.
2. Press the
Setup
button.
3. Press
d
to highlight
Head Cleaning
, then press
OK
.
Pbasics.book Page 45 Monday, August 1, 2005 12:31 PM