Epson Pro EX10000 User Manual Download

Page: 205 / 257

205

Damage due to the failure to properly maintain the projector or its filter may not be covered by the
projector's Limited Warranty.

Cleaning the Air Filter and Vents
Replacing the Air Filter

Parent topic:

Maintaining and Transporting the Projector

Cleaning the Air Filter and Vents

Clean the projector's air filter or vents if they get dusty, or if you see a message telling you to clean them.

Note:

It is recommended that you clean these parts over a 20000-hour period. Clean them more often

than this if you use the projector in a environment that is dustier than expected.

Turn off the projector and unplug the power cord.

Gently remove the dust using a small vacuum designed for computers or a very soft brush (such as
a paintbrush).

Note:

You can remove the air filter so you can clean both sides of it. Do not rinse the air filter in

water or use any detergent or solvent to clean it.

Caution:

Do not use canned air. The gases may leave a flammable residue or push dust and debris

into the projector's optics or other sensitive areas.

If dust is difficult to remove or the air filter is damaged, replace the air filter.

Parent topic:

Air Filter and Vent Maintenance

Related tasks

Turning Off the Projector

Summary of Contents for Pro EX10000


































































































































































































































































Search results

Summary of Contents for Pro EX10000

Reviews:

Related manuals for Pro EX10000

Brands by name

Popular brands

Epson Pro EX10000, User Manual

Search results

Summary of Contents for Pro EX10000

Reviews:

Related manuals for Pro EX10000

Brands by name

Popular brands