91
2.
Press the power button again. (To leave it on, press any other button.)
The projector beeps twice, the laser turns off, and the Status light turns off.
Note:
With Epson's Instant Off technology, there is no cool-down period so you can pack up the
projector for transport right away (if necessary).
Note:
If the
Light Source Calibration
setting is set to
Run Periodically
in the projector's
Management menu, light source calibration starts automatically if you turn off the projector and the
following conditions are present:
• 100 hours have passed since the last light source calibration.
• You have used the projector continuously for at least 20 minutes.
3.
To transport or store the projector, make sure the Status light is off, then unplug the power cord.
Caution:
To avoid damaging the projector or laser, never unplug the power cord when the Status
light is on or flashing.
Summary of Contents for Pro EX10000
