Epson Pro EX10000, User Manual

Page: 191 / 257

191
Setting Options Description
Refresh Mode Timer
Messages
Start
Select Start to clear an
afterimage that remains in the
projected image and turn off the
projector after the time specified
in the
Timer screen. Press any
button to cancel Refresh Mode.
Enable the
Messages setting if
you want to display a message
when Refresh Mode is in
progress.
Light Source Calibration Run Now
Run Periodically
Last Run
Selects options to perform light
source calibration to maintain the
color balance of the projected
image
Run Now : Select On to start light
source calibration now. Make
sure the projector has been
turned on for at least 30 minutes
for maximum accuracy. You may
not be able to start calibration if
the projector's environmental
temperature is out of range.
Run Periodically : Select On to
perform calibration every 100
hours of usage
Last Run : Displays the date and
time light source calibration was
last performed