Epson LQ-300+II, User Manual

Page: 94 / 162

94
Pitch
You can select from among six pitch settings.
Font
You can select six fonts in the Default Setting mode. The font
selected here appears under
Others on the control panel. The
fonts indicated on the control panel cannot be selected in the
Default Setting mode.
Auto CR (carriage return)
This setting is available only in the IBM 2390 Plus emulation
mode. When auto carriage return is on, each line feed (LF) code
or ESC J code is accompanied by a carriage return code. This
moves the print position to the beginning of the next line.
A.G.M. (Alternate Graphic Mode)
This setting is available only in the IBM 2390 Plus emulation
mode. When A.G.M. is on, the printer can use some advanced
graphics commands like those available in the ESC/P 2 mode.
Manual feed wait time
This sets the amount of wait time between the time paper is
inserted into the paper guide and when it is fed. If the paper feeds
before you can adjust its position to your satisfaction, you can
increase the wait time.
Buzzer (beeper)
The printer beeps when an error occurs. (See “Using the Error
Indicators” on page 97 for more information on printer errors.) If
you do not want the printer to beep when an error occurs, turn
this setting off.