Epson LQ-300+II, User Manual

Page: 101 / 162

101
Cause What to do
The software may not be
installed properly. Check that the software is installed
properly for your printer, as described
in the
Setup Guide . Check the software’s
printer settings.
The interface cable may not
match the specifications of the
printer or computer. Check both ends of the interface cable.
Make sure the cable meets both the
printer and computer specifications.
The printer port may not be set
correctly. For Windows 98, Me, 2000 or Windows
NT 4.0, click
Start , point to Settings ,
then click Printers . For Windows XP,
click Start , Control Panel , then click
Printers and Faxes . When the icon of
the printer you are using appears,
right-click it and select
Properties . Then,
click the Ports or Details tab and select
the appropriate port.
The Paper Out and Pause lights are on and the printer beeps
three times.
Cause What to do
The printer may be out of
paper. Load paper in the printer.
The printer sounds like it is printing, but nothing is printed.
Cause What to do
The ribbon cartridge may not
be installed properly. See the Setup Guide .
The ribbon may be worn out. Replace the ribbon cartridge.