Epson FX-2190II User Manual Download Page 74

Page: 74 / 165

FX-890II/FX-890IIN:

A4 or 8 inches continuous paper

FX-2190II/FX-2190IIN:

A3 Rotated or 13.6 inches continuous paper

Note:

The image on the right above is an example of good and bad patterns in the print results.

4. Look at the adjustment patterns and find the vertical line that is aligned the best. Then, select the

corresponding line number in the Bi-D Adjustment window.

5. Click

Set

. The adjustment value will be stored in the printer.

Using Printer Setting

This utility tool allows you to display current settings stored in the printer, change settings of the
printer, and read settings stored in the file or save settings to the file.

FX-890II/FX-890IIN/FX-2190II/FX-2190IIN User’s Guide

Printer Software

Summary of Contents for FX-2190II






































































































































































Search results

Summary of Contents for FX-2190II

Reviews:

Related manuals for FX-2190II

Brands by name

Popular brands

Epson FX-2190II, User Manual

Search results

Summary of Contents for FX-2190II

Reviews:

Related manuals for FX-2190II

Brands by name

Popular brands