5. Take a stack of paper (up to 150 sheets) and fan it. Next, tap the side and bottom edges of the paper
on a flat surface to even up the stack.
6. Insert the paper stack printable side down along the left paper guide.
7. Adjust the right paper guide so that it matches your paper’s width and lock it in place. Make sure
the position of the guide allows the paper to move up and down freely.
If you are loading envelopes, push back the envelope levers as shown below.
8. Push back the paper set levers to clamp the paper or envelopes against the guide rollers.
The cut-sheet feeder automatically loads paper when the printer receives data.
If the first line on your page appears too high or low, you can adjust its position using the Micro Adjust
function. See “Adjusting the top-of-form position” on page 56 for more information.
FX-890II/FX-890IIN/FX-2190II/FX-2190IIN User’s Guide
Options and Consumables
131
