manualshive.com logo in svg

Epson FX-2190II, User Manual, Page: 90 / 165

Share
Download
Epson FX-2190II User Manual Download Page 90

10. Pause button

❏

Stops printing temporarily, and resumes printing when pressed again.

❏

Press and hold for three seconds to enter Micro Adjust mode. Press again to exit Micro Adjust
mode.

11. Paper Out light

❏

On when no paper is loaded in the selected paper source or paper is not loaded correctly.

❏

Flashes when paper has not been fully ejected or a paper jam has occurred.

12. Tear Off/Bin lights

❏

Both of the two lights flash when continuous paper is in the tear-off position, and both of the lights
are off when continuous paper is not in the tear-off position.

❏

The left light is on when Card mode is selected.

❏

Both the lights are off when bin 1 of the optional cut-sheet feeder is selected.

❏

The right light is on when bin 2 of the optional cut-sheet feeder is selected.

13. Pitch lights

Indicate which pitch is selected.

14. Font lights

Indicate which font is selected.

Selecting a Font and Pitch

You can select one of the printer’s five fonts and pitch by using the buttons on the printer’s control
panel, as described below.

Note:

❏

Settings you make in application programs usually override settings you make from the printer’s
control panel. For best results, use your application to select a font and make other settings.

❏

The available pitch depends on the font you select. See the table below for more information.

FX-890II/FX-890IIN/FX-2190II/FX-2190IIN     User’s Guide

Control Panel     

90

Summary of Contents for FX-2190II






































































































































































Reviews:

No comments