Epson Equity LT-386SX, User Manual

Page: 21 / 235

The standard DIP switch settings are appropriate whether your
computer uses the LCD or an external color monitor and
whether your computer uses only the internal diskette drive or
also uses a hard disk drive and an external diskette drive.
If you plan to keep this standard setup, continue with the
instructions in this chapter.
If your system does not match this configuration, you need to
change the appropriate switches as described in Appendix A
before you begin. If you plan to modify your computer by
attaching an external monitor or diskette drive, see Appendix B
for instructions.
Do not turn on the computer, printer, or any peripherals until
the instructions tell you to do so. Otherwise, you may damage
some part of your equipment.
1
Unpacking
As you unpack the components,
anything is missing or damaged,
be sure to inspect each item. If
consult your Epson dealer.
1-2 Setting Up Your System