2.
Is the diskette write-protected? If the write-protect switch is
set, first make sure the diskette does not contain files you do
not want to change or lose. Then try moving the switch to
remove the write protection. (Ordinarily, it’s a good idea to
leave program diskettes write-protected, but some programs
don’t work properly on write-protected diskettes.)
3.
Try formatting a blank diskette to determine if the diskette
drive is operating properly.
If you cannot format a diskette, contact your Epson dealer.
Diskette Drive Problems
If you are having problems with the internal or external diskette
drive, check the following:
1.
Have the drive designations been exchanged using DIP
switch 1 ? (See Appendix A.)
2.
If your problem is with the external drive, be sure that DIP
switch 7 is OFF. (See Appendix A.)
3.
If your problem is with the external drive, have you defined
the drive correctly to the Equity LT-386SX by running
SETUP?
Troubleshooting 4-5
Summary of Contents for Equity LT-386SX
