Epson Endeavor Pro, User Manual

Page: 140 / 187

System BIOS version:
Restart your system. You’ll see the
system BIOS version number
displayed on the screen during
power-on diagnostics.
System
configuration:
Operating system
version:
Start SETUP and make a note of all
your configuration option settings.
At the MS-DOS prompt, type
V E R
and press
Enter.
Or watch the
screen when your system starts up.
Software versions:
In Windows applications, select
About
from the Help menu. As
your software application starts, it
usually displays a version number
on the banner screen. Also, you can
check your software manual.
CONFIG.SYS: At the MS-DOS prompt, type
T Y P E C
: \
C O N F I G
.
SYS
and press
Enter
to see a listing of your
CONFIG.SYS file, which contains
system configuration commands.
AUTOEXEC.BAT:
At the MS-DOS prompt, type
T Y P E C
: \
A U T O E X E C
.
B A T
a n d
press
Enter
to see a listing of your
AUTOEXEC.BAT file, which
contains system startup commands.
The Computer Will Not Start
The power light is on, but the computer does not start.
Place a boot or startup diskette in drive A and turn on the
computer again.
Troubleshooting 7-3