Epson Endeavor Pro, User Manual

Page: 113 / 187

7.
If you are installing a CAROM drive, you may need to
connect
an audio cable to a sound card. Follow the
instructions in your sound card documentation to connect
the audio cable to the card. (If you need to install a sound
card, see “Installing an Option Card” in Chapter 4.)
8. Position the audio cable connector so that the tab faces up
and aligns with the notch in the CD-ROM drive’s audio
connector. Then push in the connector.
9. If you installed a hard disk drive in one of the external bays,
you may want to replace the plastic faceplate. Insert one
side of the plate, then gently press on the other side until it
snaps into place.
10. Replace the internal mounting bracket; see “Replacing the
Bracket in the Computer” for instructions.
11. If you have finished installing or removing drives, replace
the computer’s cover; see “Replacing the Cover” in Chapter
4 for instructions. Then see “Running SETUP” in Chapter 2
for instructions on defining your new drive configuration.
Installing and Removing Drives in the Slimline Computer 5-19