Epson EH-TW570, User Manual

Page: 120 / 151

Check Remedy
Is the correct resolution selected?
(Only when projecting computer images) Set the computer so that the signals being output are compatible with the projector.
s
"Supported Monitor Displays" p.138
s
Computer's documentation
Is the projection mode correct? Depending on how the projector is installed, set the projection mode from one of the following: Front , Front/Ceiling ,
Rear , Rear/Ceiling .
s
Extended - Projection p.89
s
"Installation Methods" p.21
Image colors are not right
Check Remedy
Do the input signal settings match the signals from the connected
device? Change the following settings according to the signal for the connected equipment.
•
When the image is from a device connected to the Computer port
s
Signal
-
Input Signal
p.85
•
When the image is from a device connected to the Video or S-Video port.
s
Signal
-
Video Signal
p.85
Is the image brightness adjusted correctly? Adjust the
Brightness
setting from the Configuration menu.
s
Image - Brightness p.85
Are the cables connected correctly? Check that all the cables required for projection are securely connected.
Check that no cables are disconnected and that there are no poor contacts in the cables.
s
"Connecting Equipment" p.23
Is the contrast
g
adjusted correctly? Adjust the Contrast setting from the Configuration menu.
s
Image - Contrast p.85
Is the color adjustment set correctly? Adjust the Color Adjustment setting from the Configuration menu.
s
Image - Color Adjustment p.85
Are the color saturation and tint adjusted correctly?
(Only when projecting images from a video source) Adjust the Color Saturation and Tint settings from the Configuration menu.
s
Image - Color Saturation , Tint p.85
Problem Solving
120