manualshive.com logo in svg

Epson EH-LS10500, User Manual

Share
Download
Epson EH-LS10500 User Manual Download Page 94

Troubleshooting

93

Check

Remedy

Does the connected device meet the HDMI
CEC standards?

If the connected device does not meet the HDMI CEC standards,
it cannot be operated even if it is connected to the HDMI port.
See the documentation and so on supplied with the connected
device for more information.
Also, press the 

 button, and then check if the device is

available under 

Device Connections

. 

s

 

 p.54

Are the cables connected correctly?

Check that all the cables required to use HDMI Link are securely
connected. 

s

 

 p.54

Is the power for the amplifier or DVD/Blu-ray
disc player and so on turned on?

Put each device in standby status. See the documentation and
so on supplied with the connected device for more information.

Was a new device connected, or was the con-
nection changed?

If the CEC function for a connected device needs to be set again,
for example when a new device is connected or the connection
is changed, you may need to restart the device.

Are many multi-media players connected?

Up to 3 multi-media players that meet the HDMI CEC standards
can be connected at the same time.

The device name is not displayed under Device Connections

Check

Remedy

Does the connected device meet the HDMI
CEC standards?

If the connected device does not meet the HDMI CEC standards,
it is not displayed. See the documentation and so on supplied
with the connected device for more information.

Summary of Contents for EH-LS10500
























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands