manualshive.com logo in svg

Epson EH-LS10500, User Manual

Share
Download
Epson EH-LS10500 User Manual Download Page 93

Troubleshooting

92

Problems with 3D images

Cannot project correctly in 3D

Check

Remedy

Are the 3D Glasses turned on?

Turn on the 3D Glasses.

Is a 3D image being projected?

If the projector is projecting a 2D image, or if an error occurs on
the projector that prevents the 3D image from being projected,
you cannot view 3D images even if you are wearing the 3D
Glasses.

Is the input image in 3D?

Check that the input image is 3D compatible.
Since most TV broadcasts do not contain a 3D format signal, 3D
reception must be set manually.

Is 

3D Display

 set to 

Off

?

If 

3D Display

 is set to 

Off

 from the Configuration menu, the pro-

jector does not automatically change to 3D even when a 3D im-
age is input. Press the 

 button. 

s

 

Signal

 - 

3D Setup

 - 

3D

Display

 

 p.70

Is the correct 3D format set?

The projector automatically selects the appropriate 3D format,
but if the 3D image is not displayed correctly, use 

3D Format

from the Configuration menu to select another format. 

s

 

Sig-

nal

 - 

3D Setup

 - 

3D Format

 

 p.70

Are you viewing within the reception range? Check the range within which the 3D Glasses can communicate

with the projector, and view within that range. 

s

 

 p.39

Has pairing been performed correctly?

See the User's Guide for the 3D Glasses to perform pairing.

Are there any devices that cause radio wave
interference in the vicinity?

When using other devices at the same time with the frequency
band (2.4 GHz) such as Bluetooth communication devices, wire-
less LAN (IEEE802.11b/g), or microwave ovens, radio wave inter-
ference may occur, the image may be interrupted, or communi-
cation may not be possible. Do not use the projector near these
devices.

The 3D image is enlarged and truncated

Check

Remedy

Is the correct 3D video format set?

Video may be truncated if an incorrect 3D format is set. Set the
correct 3D format. 

s

 

 p.35

Problems with HDMI

HDMI Link does not function

Check

Remedy

Are you using a cable that meets the HDMI
standards?

Only high-speed HDMI cables are supported.

Summary of Contents for EH-LS10500
























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands