Epson EH-LS10500, User Manual

Page: 47 / 119

Setting Image Quality
46
a
Press the button.
c
You can make settings from the
Configuration menu.
s
Image -
Dynamic Contrast p.68
b
Use the buttons to
select the item, and then press the
button to confirm the selection.
c
Press the button to exit the
menu.
Frame Interpolation
This setting compares the current and previous frames, and then creates a frame between them to to create
smooth images even for movies with a quick frame rate.
You can select the level of interpolation from Low , Normal , or High .
a
Press the button.
c
•
You can make settings from the
Configuration menu.
s
Signal -
Frame Interpolation p.70
•
This cannot be set when Image
Processing is set to Fast in the
Signal menu.
s
Signal -
Advanced - Image
Processing p.70
•
This cannot be set when a
computer image signal is being
input.
•
When projecting 3D images and
when
Super-resolution/4K from
the Signal menu is set to 4K , this
setting is only available for
1080p/24 Hz signals
s
Signal -
Super-resolution/4K p.70
b
Use the buttons to
select the item, and then press the
button to confirm the selection.
c
•
If you notice any distortion after
changing the setting, set it to
Off .
•
When a 4K image signal is being
input, this setting is fixed at
Off ,
and Low , Normal , and High
cannot be set.
c
Press the button to exit the
menu.