Configuration Menu
80
Function
Menu/Settings
Explanation
Address 1 Setting
Address 2 Setting
Address 3 Setting
-
Enter the destination email addresses to which
to send the notification email, and select the
problems or warnings you want to be notified
about. You can register up to three destinations.
You can enter up to 64 single-byte alphanumeric
characters for the email addresses. ( " ( ) , ; < > [ ¥ ]
cannot be used.)
You can enter up to 32 characters on the Con-
figuration menu. When entering more than
32 characters, use your Web browser to enter the
text.
s
Others menu
Function
Menu/Settings
Explanation
AMX Device Dis-
covery
On, Off
When you want to allow the projector to be de-
tected by AMX Device Discovery, set this to
On
.
Set this to
Off
if you are not connected to an en-
vironment controlled by a controller from AMX
or AMX Device Discovery.
Control4 SDDP
On, Off
When you want to allow the projector to be de-
tected by Control4 SDDP, set this to
On
. Set this
to
Off
if the projector is not connected to an en-
vironment controlled by a controller from Con-
trol4 or Control4 SDDP.
Bonjour
On, Off
Set this to
On
when connecting to the network
using Bonjour. See Apple's Web site for more in-
formation on the Bonjour service.
Reset menu
To reset all of the network settings, select
Yes
. After you reset all the settings, the
Basic
menu appears.
Complete menu
Select this when you have finished making settings on the
Network
menu.
s
Soft keyboard operations
The
Network
menu contains items that require input of alphanumerics during setup. In this case, the
following soft keyboard is displayed. Use the
buttons to move the cursor to the desired
key, and then press the
button to enter the selected character. After inputting, press
Finish
on the soft
keyboard to confirm your input. Press
Cancel
on the soft keyboard to cancel your input.
