manualshive.com logo in svg

Epson EH-LS10500, User Manual

Share
Download
Epson EH-LS10500 User Manual Download Page 36

Basic Operations

35

Viewing 3D Images

This projector allows you to view 3D images using 3D Glasses.

c

•

Since the 3D Glasses use the active shutter method, they need to be charged in advance. 

s

 

 p.38

•

You also need to pair the 3D Glasses with the projector in advance. 

s

 

 p.39

Warnings Regarding Viewing 3D Images

Note the following important points when viewing 3D images.

Warning

Disassembling or remodeling

•

Do not disassemble or remodel the 3D Glasses.
This could cause a fire to occur or the images to appear abnormal when viewing, causing you to feel unwell.

Storage locations

•

Do not leave the 3D Glasses or the supplied parts within reach of children.
If they are not handled correctly, they could cause an injury.

Wireless (Bluetooth) communication

•

Electromagnetic interference may cause medical equipment to malfunction. Before using the device, make
sure there is no medical equipment in the vicinity.

•

Electromagnetic interference may cause automatically controlled equipment to malfunction which could
cause an accident. Do not use the device near automatically controlled equipment such as automatic doors
or fire alarms.

Heating

•

Do not place the 3D Glasses in a fire, on a heat source, or leave them unattended in a location subject to high
temperatures. Because this device has a built-in rechargeable lithium battery, it could cause burns or a fire if
it ignites or explodes.

Charging

•

When charging, connect the supplied cable to the USB port designated by Epson. Do not charge using other
devices as it may cause the battery to leak, overheat, or explode.

•

Only use the supplied charging cable to charge the 3D Glasses. Otherwise, it could overheat, ignite, or explode.

Caution

3D Glasses

•

Do not drop or press too forcefully on the 3D Glasses.
If the glass sections and so on are broken, an injury could occur. Store the glasses in the soft glasses case.

•

Be careful of the edges of the frame when wearing the 3D Glasses.
If it pokes your eye and so on, an injury could occur.

•

Do not place your finger in any of the moving sections (such as the hinges) of the 3D Glasses.
Otherwise an injury could occur.

Summary of Contents for EH-LS10500
























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands