Basic Operations
33
a
Press the
button.
c
You can make settings from the
Configuration menu.
s
Signal
-
Aspect
b
Use the
buttons to
select the setting name, and then
press the
button to confirm the
selection.
c
Aspect
may not be available
depending on the type of signal.
By normally selecting Auto, the optimum aspect is used to display the input signal. Change the setting if you
want to use a different aspect.
The table below shows the image projected on a 16:9 screen.
Input Image
Setting Name (Aspect)
Normal
Full
Zoom
4:3 images
16:9 images
When projecting 16:9 images, Full and Zoom cannot
be selected.
Images recorded using
squeeze
Letterbox images
*
Notes
Matches the vertical size
of the projection panel.
The aspect ratio differs
depending on the input
image.
Uses the entire projection
panel.
Retains the aspect ratio of
the input signal, and
matches the horizontal
size of the projection pan-
el. The top and bottom of
the image may be trunca-
ted.
*
The letterbox image used in this explanation is a 4:3 aspect ratio image displayed in 16:9 with black margins at
the top and bottom for subtitle placement. The margins at the top and bottom of the screen image are used for
subtitles.
With this projector you can also set
Anamorphic Wide
and
Horiz. Squeeze
.
Set
Anamorphic Wide
and attach a commercially available anamorphic lens to enjoy DVDs, Blu-rays, and so
on of images recorded at Cinema Scope size.
