Basic Operations
34
Horiz. Squeeze
stretches the horizontal aspect of the input signal. This allows you to project across the full
width of the screen when using a commercially available anamorphic lens.
c
•
If
Anamorphic Wide
is selected when
Overscan
is set, the image may be truncated. Set
Overscan
to
Off
.
s
Signal
-
Advanced
-
Overscan
•
When projecting 3D images in
Anamorphic Wide
, only 1080p/24 Hz/frame packing signals are
supported.
•
When a 4K image signal is being input, you can only select
Normal
,
Anamorphic Wide
, and
Horiz.
Squeeze
.
Hiding the Image Temporarily
You can use this to temporarily hide the image on the screen.
Press the
button to show or hide the image.
c
•
Because moving images continue to play even when they are hidden, you cannot return to the point
at which you hid the images using the
button.
•
If the
button is pressed while the Configuration menu is displayed, the menu is temporarily
hidden, and
is displayed at the top-right of the screen.
•
If you press the
button on the remote control or the control panel while the image is hidden, a
confirmation message is displayed asking if you want to turn off the projector. Press the
button
again to turn off the projector.
