Epson EB-L1490U User Manual Download

Page: 22 / 296

Name

Function

[

] button

Turns the projector on.

[

] button

Turns the projector off.

Change input buttons

Changes to images from each input port.

"Switching to the Target Image by Remote Control"

p.64

The [SDI] button only functions for EB-L1755U/EB-
L1750U/EB-L1505UH/EB-L1500UH/EB-L1495U/EB-
L1490U.

[Aspect] button

Each time the button is pressed, the aspect mode changes.

"Changing the Aspect Ratio of the Projected Image"

p.82

[Auto] button

If pressed while projecting analog RGB signals from the
Computer port or the BNC port, you can automatically
optimize Tracking, Sync., and Position.

[Freeze] button

Images are paused or unpaused.

"Freezing the Image (Freeze)"

p.112

[Test Pattern] button

Displays a test pattern.

"Displaying a Test Pattern"

p.33

[Lens Shift] button

Press to adjust the lens shift.

"Adjusting the Position of the Projected Image (Lens

Shift)"

p.34

If pressed for more than three seconds, the lens position
moves to the home position.

[Zoom] button

Press to adjust the zoom.

"Adjusting the Image Size"

p.38

[Menu] button

Displays and closes the Configuration menu.

"Using the Configuration Menu"

p.141

Name

Function

[

][

]

buttons

•

Press to adjust focus, zoom, distortion, and lens shift.

"Adjusting the Position of the Projected Image

(Lens Shift)"

p.34

"Adjusting the Image Size"

p.38

"Correcting the Focus"

p.39

•

When the Configuration menu or the Help screen is
displayed, pressing these buttons selects menu items
and setting values.

"Using the Configuration Menu"

p.141

•

When using the optional wireless mouse receiver,
pressing these buttons moves the pointer.

[

] button

•

When the Configuration menu or the Help screen is
displayed, it accepts and enters the current selection and
moves to the next level.

"Using the Configuration Menu"

p.141

•

Acts as a mouse's left button when using the optional
wireless mouse receiver.

[A/V Mute] button

Turns the video and audio on or off.

"Hiding the Image and Sound Temporarily (A/V

Mute)"

p.111

[Page] buttons
[

[

][

]

•

Press to change the test pattern while a test pattern is
displayed.

•

Moves to the previous or next image file when
projecting images from a computer connected via a
network.

•

When using the optional wireless mouse receiver, you
can change the PowerPoint file page during projection
by pressing the page up/page down buttons.

[Volume] buttons

[

][

]

[

] Decreases the volume.

[

] Increases the volume.

"Adjusting the Volume"

p.65

[ ] button

Displays the Info menu from the Configuration menu.

"Info Menu (Display Only)"

p.166

Part Names and Functions

Summary of Contents for EB-L1490U









































































































































































































































































































Search results

Summary of Contents for EB-L1490U

Reviews:

Related manuals for EB-L1490U

Brands by name

Popular brands

Epson EB-L1490U, User Manual

Search results

Summary of Contents for EB-L1490U

Reviews:

Related manuals for EB-L1490U

Brands by name

Popular brands