Epson EB-L1490U, User Manual

Page: 154 / 296

Submenu Function
A/V Settings
A/V Output : Set this to Always On if you want to output
audio and images to an external device even when the
projector is in standby status.
Monitor Out : Select the image source output to an external
monitor when the projector is in standby status. When set
to
Auto , analog RGB signals from the Computer port or the
BNC port are output depending on which source was
selected when the projector was turned off.
Audio Settings : Performs the following audio related
settings.
•
Audio Output : Select the audio to be output when
projecting images from the Computer port, BNC port, or
DVI-D port. When set to
Auto , audio is output from the
audio input port corresponding to each image input port.
s
"Connecting Equipment" p.49
•
HDMI Audio Output : Select the audio source when
projecting images from the HDMI port. If you select
HDMI , audio for the image is output as it is. If you select
Audio3 , audio is output from the Audio3 port.
Submenu Function
Standby Mode
Standby Mode : If you set this to Communication On , you
can perform the following operations even if the projector is
in standby mode.
•
Monitor and control the projector over a network.
•
Output audio and images to an external device. (Only
when
A/V Output is set to Always On .)
•
Communication from the HDBaseT port is enabled. (Only
when
Control Communications is set to On .)
a
When monitoring or controlling the pro‐
jector using wireless LAN, set
Connection
Mode to Advanced .
s
Network - Wireless LAN - Connection
Mode p.159
Port : Select the communication port that remains enabled
when the projector is standing by.
List of Functions
154