Epson DLQ-3500II User Manual Download Page 71

Page: 71 / 147

3. Click

Print

. The printer prints three sets of adjustment pattern. To see the adjustment pattern, you

need four sheets of A3 size single sheet paper or 15 inch (recommended) continuous paper.

Note:

The image on the right above is an example of good and bad patterns in the print results.

4. Look at the adjustment patterns and find the vertical line that is aligned the best. Then, select the

corresponding line number in the Bi-D Adjustment window.

5. Click

Set

. The adjustment value will be stored in the printer.

Using Printer Setting

This utility tool allows you to display current settings stored in the printer, change settings of the
printer, and read settings stored in the file or save settings to the file.

DLQ-3500II/DLQ-3500IIN User’s Guide

Printer Software

Summary of Contents for DLQ-3500II




















































































































































Search results

Summary of Contents for DLQ-3500II

Reviews:

Related manuals for DLQ-3500II

Brands by name

Popular brands

Epson DLQ-3500II, User Manual

Search results

Summary of Contents for DLQ-3500II

Reviews:

Related manuals for DLQ-3500II

Brands by name

Popular brands