Epson DLQ-3500II User Manual Download Page 114

Page: 114 / 147

6. Slide the edge guides all the way out. Then pull out the sheet guide and the paper support

completely.

7. Turn the printer on and make sure that

Manual/CSF

is selected as the paper source on the control

panel. If not, select it by pressing the

Paper Source

button.

8. Adjust the paper size in your software, if necessary.

You are now ready to load paper to your cut sheet feeder. To remove the cut sheet feeder, reverse the
steps described above.

Loading paper to the cut sheet feeder

For single sheet multipart forms, use only the type of forms that are glued at the top.

To avoid paper jams, do not allow too many printed sheets to be stacked on the paper guide at one
time. Remove the stack when it is half as thick as the paper loading limit marked on the cut sheet
feeder.

Follow these steps to load paper to the cut sheet feeder:

1. Pull the paper set lever forward until the paper guides retract to allow paper loading.

DLQ-3500II/DLQ-3500IIN User’s Guide

Options and Consumables

114

Summary of Contents for DLQ-3500II




















































































































































Search results

Summary of Contents for DLQ-3500II

Reviews:

Related manuals for DLQ-3500II

Brands by name

Popular brands

Epson DLQ-3500II, User Manual

Search results

Summary of Contents for DLQ-3500II

Reviews:

Related manuals for DLQ-3500II

Brands by name

Popular brands