Epson DLQ-3500II User Manual Download Page 22

Page: 22 / 147

Displays error information.

Displays available buttons and instructions.

Note:

Follow the onscreen instructions to recover from the error.

Entering Characters

To enter characters and symbols for network settings for DLQ-3500IIN from the control panel, use
the

, and

buttons and the software keyboard on the LCD screen. Press the

, or

button to select a character or function button on the keyboard, and then press the

button. When

you have finished entering characters, select

, and then press the

button.

Function button

Descriptions

Moves the cursor to the left or right.

Switches the character type. You can enter alphanumeric or symbols.

Enters a space.

Deletes a character to the left (backspace).

Enters the selected characters.

DLQ-3500II/DLQ-3500IIN User’s Guide

Printer Basics

Summary of Contents for DLQ-3500II




















































































































































Search results

Summary of Contents for DLQ-3500II

Reviews:

Related manuals for DLQ-3500II

Brands by name

Popular brands

Epson DLQ-3500II, User Manual

Search results

Summary of Contents for DLQ-3500II

Reviews:

Related manuals for DLQ-3500II

Brands by name

Popular brands