Skip Over Perforation
This feature is available only when continuous paper is selected as the paper source. When you turn on
this feature, the printer provides a one-inch (25.4 mm) margin between the last line printed on one
page and the first line printed on the next page. Because most application program margin settings
override margin settings from the control panel, you should use this setting only if you cannot set your
top and bottom margins using your application.
Print Start Position
Allows you to set the base point for the print start position.
Character/Line Space Settings
Font
Select the font you want to use. You can select from the following fonts.
HSD (High Speed Draft)
,
Draft
,
Roman
,
Sans Serif
,
Courier
,
Prestige
,
Script
,
OCR-B
,
Orator
,
Orator-S
,
Script C
,
Roman T
,
Sans serif H
You can also access this setting from the
Basic Settings
menu.
Pitch
Select desired pitch to use. Choices are shown below.
10cpi
,
12 cpi
,
15 cpi
,
17 cpi
,
20 cpi
,
Proportional
You can also access this setting on the
Basic Settings
menu.
Character Table
You can select among various character table. The character tables available vary according to the
models available in the region. Make sure that you select same character table as the print system if
necessary.
When using a print system, change the settings on the print system.
DLQ-3500II/DLQ-3500IIN User’s Guide
Menu Options for Settings
25
