Epson DLQ-3500II User Manual Download Page 70

Page: 70 / 147

Note:

It might not be possible to retrieve the printer status during printing. In this situation, click the

EPSON

Status Monitor 3

button in the Utility tab, and use the printer with the status window left open.

Using Bi-D Adjustment

This utility tool allows you to make adjustment when you find a misalignment in vertical line.

Making adjustment with Bi-D Adjustment

To make Bi-D Adjustment, follow the steps below.

Caution:

❏

Do not turn off the printer while the printer is printing adjustment pattern. Doing so may
cause the printer to store incorrect settings. If you turned off the printer during the adjustment
process, restart Bi-D Adjustment again.

❏

Serial connection is not supported.

❏

Make sure that the printer’s status is ready before making Bi-D Adjustment.

❏

If Bi-D Adjustment is not printed properly, set the printer’s font setting to default and try
again.

1. Open the

Utility

menu, then click the

Bi-D Adjustment

icon. To find out how to open the

Utility

menu, see “Using the Printer Driver” on page 55. The Bi-D Adjustment window appears.

2. Click

Next

DLQ-3500II/DLQ-3500IIN User’s Guide

Printer Software

Summary of Contents for DLQ-3500II




















































































































































Search results

Summary of Contents for DLQ-3500II

Reviews:

Related manuals for DLQ-3500II

Brands by name

Popular brands

Epson DLQ-3500II, User Manual

Search results

Summary of Contents for DLQ-3500II

Reviews:

Related manuals for DLQ-3500II

Brands by name

Popular brands