Epson cLX-300+II RTP, Service Manual

Page: 37 / 130

EPSON LX-300+II/300+II RTP/1170II Revision D
PRODUCT DESCRIPTION Paper Specifications 37

Envelope
Note: Printing on envelope is available only under normal temperature and humidity
conditions.
Note: Set the longer side of envelope horizontally.

Continuous paper (Single sheet and Multipart)
Note: The value in parentheses represents the size available with LX-1170II.
Table 1-42. Envelope
Minimum Maximum
Envelop
(No. 6)
Width
inch 6.5
mm 165
Length
inch 3.6
mm 92
Envelop
(No. 10)
Width
inch 9.5
mm 241
Length
inch 4.1
mm 105
Total Thickness
inch 0.0063 0.0205
mm 0.16 0.52
The difference of thickness at the recommended printable area
is within 0.25mm or 0.0098 inch.
Weight
g/m 2 45 90
lb. 12 24
Quality
BOND paper, PLAIN paper or AIR MAIL
No glue at a flap
Not curled, not folded, not crumpled
Table 1-43. Continuous Paper (Single sheet and Multi Part)
Rear Entry Bottom Entry
Min. Max. Min. Max.
Width
inch 4 10 (16) 4 10 (16)
mm 101.6 254 (406.4) 101.6 254 (406.4)
Length
(one page)
inch 4 22 4 22
mm 101.6 558.8 101.6 558.8
Copies 1 or 4 copies 1 or 4 copies
Total Thickness
inch 0.0025 0.0154 0.0025 0.0154
mm 0.065 0.39 0.065 0.39
Weight
(not multipart)
g/m 2 52 82 52 82
lb. 14 22 14 22
Weight
(one sheet of
multipart) g/m
2
40 58 40 58
lb. 12 15 12 15
Quality
Plain paper, Reclaimed paper,
Carbonless multipart paper Plain paper, Reclaimed paper,
Carbonless multipart paper
Jointing
Point glue or paper staple (both
sides) Point glue or paper staple (both
sides)