Epson C4100 - AcuLaser Color Laser Printer, Reference Manual

Page: 50 / 432

50
Paper Handling
If transparencies are loaded incorrectly, the message
Check
Transparency
appears on the LCD panel. Remove the
transparencies from the MP tray and remove the jammed
transparencies from the MP tray. Open and close cover A to
clear the message on the LCD panel, then reload the
transparencies. The printer resumes printing from the page
that jammed.
❏
When using transparencies, load them in the MP tray and set
the Paper Type setting to
Transparency in the printer driver.
❏
When the Paper Type setting in the printer driver is set to
Transparency , do not load any other type of paper except
transparencies.
c
Caution:
Sheets that have just been printed on may be hot.
Envelopes
The print quality of envelopes may be irregular because different
parts of an envelope have different thicknesses. Print one or two
envelopes to check the print quality.
c
Caution:
Do not use window envelopes unless they are specifically
designed for laser printers. The plastic on most window envelopes
will melt when it comes into contact with the fuser.
Note:
❏
Depending on the quality of envelopes, the printing environment,
or the printing procedure, envelopes might be wrinkled. Make a trial
print run before you print on a lot of envelopes.
❏
Duplex printing is not available for envelopes.