Epson C4100 - AcuLaser Color Laser Printer, Reference Manual

Page: 222 / 432

222
Replacing Consumable Products
If a consumable product reaches the end of its service life, the
printer stops printing and displays the following messages on the
LCD panel or the window of EPSON Status Monitor 3. When this
happens, the printer cannot resume printing until you replace the
depleted consumable products.
* The letters C, M, Y, and K appear in this position, indicating the color of the toner
to be replaced. For example, the message
Y Toner Low
means that the amount of
toner remaining in the yellow toner cartridge is low.
Note:
Messages appear for one consumable product at a time. After replacing
a consumable product, check the LCD panel for replacement messages
for other consumable products.
Toner Cartridge
Handling precautions
Always observe the following handling precautions when
replacing imaging cartridges.
❏
Installing a genuine toner cartridge is recommended. Using
a non-genuine toner cartridge may affect print quality.
EPSON shall not be liable for any damages or problems
arising from the use of consumable products not
manufactured or approved by EPSON.
LCD Panel
Message Description
Replace Toner
xxxx* The indicated toner cartridges are
empty.
Replace
Photocondctr Printing has stopped to avoid
damage to the engine.
Replace Transfer
Unit The transfer unit has reached the
end of its service life.