42
Note:
Lightly wrinkled paper may scan better if you slow down the feeding speed during scanning or
smooth out the wrinkles before loading. Use a carrier sheet to scan delicate originals or originals that are
easily wrinkled. To scan originals that are incorrectly detected as double feeds, set the
DFDS Function
(Double Feed Detection Skip Function) to
On
on the control panel before you resume scanning, or set
the
Detect Double Feed
setting to
Off
on the Main Settings tab in the Epson Scan 2 window.
Caution:
Do not load the following types of originals directly in the scanner, or they may be damaged or
may damage the scanner:
• Photos
• Originals that are bound
• Passports
• Thermal paper
• Fabric or other non-paper originals
• Originals containing staples or paper clips
• Originals with wet ink or glue
• Ripped originals
• Heavily wrinkled or curled originals
• Originals with holes on the bottom of them
• Transparencies
• Originals with carbon paper backing
• Originals with sticky notes attached
• Glossy originals
Parent topic:
Loading Originals in the Input Tray
Loading Plastic and Laminated Cards in the Input Tray
You can load plastic and laminated cards that meet the card specifications in the input tray.
Note:
For best results, make sure Edge Fill is set to
None
in the scanner software.
Summary of Contents for B11B259201
