Epson AcuLaser M2000D, Service Manual

Page: 160 / 228

EPSON AcuLaser M2000D/M2000DN/M2010D/M2010DN Revision B
MAINTENANCE Cleaning 151
Confidential
6.1 Cleaning
Clean the parts listed in the table below according to the printer condition.
MAIN UNIT
†
Printer exterior surface
Wipe the surface clean with a cloth wrung out of water.
Figure 6-1. Cleaning the Printer Surface
† Inside of the printer
Remove the Developing unit and the photoconductor unit, and wipe off any paper
dust or dirt inside the printer with a dry soft cloth.
Figure 6-2. Inside of the printer
Table 6-1. Cleaning
Unit Cleaning point Clean the point when
;
Main unit Printer exterior surface The surface is contaminated.
Inside of the unit Servicing
Charging wire Print quality problem occurs.
Paper feed roller & Separation roller
(Standard cassette) An abnormality is observed in paper
feeding/conveying operations.
„
Paper jam frequently occurs
„
Paper cannot be fed normally
Paper feed roller & Separation roller
(MP tray)
Optional
cassette unit Paper feed roller & Separation roller
(Optional cassette unit)
Make sure to turn the power switch OFF and unplug the power
code before cleaning to avoid electric shock, burn or any other
injuries.
„ Do not use alcohol, thinner, or any other solvents.
„ Be extremely careful not to make the internal parts of the
printer get wet.
„ A hard brush or cloth can scratch the product. Do not use them
to wipe the product.