Maintenance and Transportation
337
11
11
11
11
11
11
11
11
11
11
11
11
If a consumable product reaches the end of its service life, the
product stops printing and displays the following messages in the
LCD panel or the window of EPSON Status Monitor 3. When this
happens, the product cannot resume printing until you replace
the depleted consumable products.
* The letters C, M, Y, and K appear in this position, indicating the color of the
toner to be replaced. For example, the message
Y Toner Low
means that
the amount of toner remaining in the yellow toner cartridge is low.
Note:
❏
Messages appear for one consumable product at a time. After
replacing a consumable product, check the LCD panel for
replacement messages for other consumable products.
❏
Print quality cannot be guaranteed when printing with a worn
consumable product. If print quality is not what you expected,
replace the consumable product.
❏
The product stops printing if printing with a worn consumable
product might damage the product. If the product stops printing,
replace the consumable product.
LCD Panel Message
Description
Replace Toner uuuu*
The indicated toner cartridge is empty.
Replace Photoconductor
The photoconductor unit comes to the end
of its service life. Even if this message is
displayed in the LCD panel, you can
continue to print for a short time by pressing
the
x
B&W Start or
x
Color Start button on
the control panel. The message in the LCD
panel changes from
Replace
Photoconductor
to
Worn Photoconductor
.
