Epson AcuLaser C8600, Reference Manual

Page: 197 / 415

Functions of the Control Panel
195
6
6
6
6
6
6
6
6
6
6
6
6
GL2 Menu
This menu lets you set the printer to emulate a plotter, allowing
you to use software that requires a plotter for output. LJ4GL2
mode is similar to GL/2 mode supported in the HP LaserJet 4
mode. The GLlike mode emulates some of the HP-GL plotter
commands and includes all the commands found in HP’s GL/2
mode, as well as two additional commands.
* Available only when
GLIike
is selected as the GL Mode.
Item Settings (default in bold)
GL Mode LJ4GL2, GLlike
Scale Off, A0, A1, A2, A3
Origin Corner, Center
Pen Pen0, Pen1, Pen2*, Pen3*, Pen4*, Pen5*,
Pen6*
End Butt, Square, Triangular, Round
Join Mitered, Miteredbeveled, Triangular, Round,
Beveled, None
Pen 0 0.05 to 0.35 to 5.00 mm in 0.05 increments
Pen1 0.05 to 0.35 to 5.00 mm in 0.05 increments
Pen2* 0.05 to 0.35 to 5.00 mm in 0.05 increments
Pen3* 0.05 to 0.35 to 5.00 mm in 0.05 increments
Pen4* 0.05 to 0.35 to 5.00 mm in 0.05 increments
Pen5* 0.05 to 0.35 to 5.00 mm in 0.05 increments
Pen6* 0.05 to 0.35 to 5.00 mm in 0.05 increments