Epson AcuLaser C8600, Reference Manual

Page: 168 / 415

166
Functions of the Control Panel
2
3
9
10 Up
Enter
Down
Back buttons Use these buttons to access the control
panel menus, where you can make
printer settings and check the status of
consumable products. For instructions
on how to use each button, see “Using
the Control Panel Menus” on page 167.
4
Job Cancel button Press once to cancel the current print job.
Press down for more than two seconds
to delete all jobs from the printer
memory, including jobs the printer is
currently receiving, saving to the Hard
Disk Drive, or printing.
5 Start/Stop button Switches the printer between ready and
offline status.
When the error light is flashing, pressing
this button clears the error and switches
the printer to ready status.
6 Error light
(Red) On or flashes when an error has
occurred.
7 Ready light
(Green) On when the printer is ready, indicating
that the printer is ready to receive and
print data.
When the printer is not ready, this light
is off.
8 Data light
(Yellow) On when print data is stored in the print
buffer (the section of printer memory
reserved for receiving data) but not yet
printed.
Flashing when the printer is processing
data.
Off when no data remains in the print
buffer.