Epson 1815p - PowerLite XGA LCD Projector User Manual Download Page 157

Page: 157 / 204

Maintaining the Projector

157

Follow these steps to replace the lamp and air filter:

1. Turn off the projector and unplug the power cord.

2. Let the projector cool for at least an hour (if it has been on). The

lamp is extremely hot immediately after use.

3. Loosen the lamp cover screw (you don’t need to remove it). Then

slide the lamp cover to the side and lift it off of the projector.

4. Loosen the two screws holding the lamp in place (you can’t

remove them).

warning

Let the lamp cool fully
before replacing it.

In the unlikely event that
the lamp has broken, small
glass fragments may be
present and should be
removed carefully to avoid
injury.

If the lamp is used after the
replacement period has
passed, the possibility that
the lamp may break
increases. When a lamp
replacement message
appears, replace the lamp
with a new one as soon as
possible, even if it is still
working.

Loosen, but don’t
remove these screws

Summary of Contents for 1815p - PowerLite XGA LCD Projector













































































































































































































Search results

Summary of Contents for 1815p - PowerLite XGA LCD Projector

Reviews:

Related manuals for 1815p - PowerLite XGA LCD Projector

Brands by name

Popular brands

Epson 1815p - PowerLite XGA LCD Projector, User Manual

Search results

Summary of Contents for 1815p - PowerLite XGA LCD Projector

Reviews:

Related manuals for 1815p - PowerLite XGA LCD Projector

Brands by name

Popular brands