Epson 1010, User Manual

Page: 42 / 279

Selecting a Paper Feeding Method
The lever positions are marked by icons.
Single sheet position: When you load single sheets from
either the paper guide or from the optional cut sheet feeder,
the lever should be all the way back.
Continuous feed position: When you load continuous paper
with the built-in push tractor, the lever should be all the
way forward on the standard width printer and in the
middle on the wide carriage printer.
Pull tractor position-wide carriage printer only: When you
load continuous paper with the optional pull tractor, the
lever should be all the way forward on the wide carriage
printer. Even when you use the built-in push tractor at the
same time, you must set the lever to this position. Only
select this position if you are using the optional pull tractor.
Note: On the standard width printer, the paper release lever is in
the forward position for continuous paper whether the paper is
loaded from the built-in push tractor or the optional pull tractor.
Paper Handling 2-3