Epson 1010, User Manual

Page: 241 / 279

Word Processing
ESC
a
Select Justification
Format:
A S C I I c o d e : E S C
a
n
Decimal: 27 97
n
Hexadecimal: 1B 61
n
Comments:
Sets the type of justification.
The following values can be used for n:
0: Selects left justification.
1: Selects centering.
2: Selects right justification.
3: Selects full justification.
The default setting is n = 0. Full justification (n = 3) is performed
when the buffer becomes full; HT and BS are invalid except in
n = 0
mode. For n = 3 there must be no carriage returns within a
paragraph.
ESC SP
(space)
Set Intercharacter Space
Format:
ASCII code: ESC SP n
Decimal:
27 32 n
Hexadecimal: 1B 20
n
Comments:
Sets
the
amount of space added to the
right
of each character, in
addition to the space already allowed in the design of the
character. The number of dots is determined by n, which should
be from 0 to 127.
Each
unit of space is 1/120th of an inch in draft
mode and 1/180th of
an
inch in Letter Quality and proportional
modes.
Command Summary
9-33