Standalone VGA Grid User Guide
2-3 Configure an audio source
6. Check
Enable audio
check box.
7. If the default audio format AAC 44KHz, stereo, 320 Kbps is not desired, click the
Audio format
drop-
down menu to select an audio codec. See
Fine-tune channel configuration
for help choosing one of the
supported audio codecs.
If desired, you can choose
Mono
to have left and right stereo channels combined and
streamed together (i.e. when listening to the streamed audio, the same blended sound will
come through both the left and right channels).
8. Click the
Audio channels
drop-down menu to choose mono (1 channel) or stereo (2 channels).
9. Click the
Audio bitrate
drop-down menu to choose the audio transmission speed. Increasing this value
produces better sound quality but uses more system bandwidth to transmit the audio signal.
For
stereo
audio, we recommend 256 kbps or 320 kbps.
10. Click
Apply
.
Set audio volume
To set audio volume:
1. Ensure an audio input source is connected to an audio input port.
2. Connect to the admin interface using your preferred connection method. See
Connect to the Admin
Interface
.
3. Login as admin.
4. From the web interface, scroll the
Sources
section.
5. Select an audio source; the audio configuration page opens.
68
